Graphene Ceramic Spray

Benefits of graphene ceramic spray:

Enhance your vehicle's protection, slickness, and durability with the power of graphene and ceramic.
Enjoy extreme water beading action for an enhanced shine that turns heads.
Shield your car from harmful UV rays, water, dirt, grime, dust, and debris on contact.
Experience long-lasting protection for a minimum of 6+ months, saving you time and effort.
Safe to use on all exterior vehicle surfaces, ensuring versatility and convenience.
Achieve professional-grade results with a simple spray and wipe process.
Preserve your car's value and appearance with an unmatched level of coating performance.

How to Apply:

Preparation:

Ensure the surface is clean and free of dust, dirt, and debris.
Park your vehicle in a shaded area to prevent the product from drying too quickly.
If necessary, wash and dry your vehicle before applying Shine Armor Graphene Ceramic Spray.

Application:
Shake the bottle well before use to ensure the product is thoroughly mixed.
Hold the spray bottle approximately 6-8 inches away from the surface.
Spray a small amount of Shine Armor Graphene Ceramic Spray onto the surface in a sweeping motion, covering a manageable area at a time.
For larger areas, you may need to spray multiple times to ensure even coverage.
Avoid applying excessive product, as a little goes a long way.

Spreading:
Immediately after spraying, use a clean and soft microfiber cloth to spread the product evenly over the surface.
Apply gentle pressure and work in circular or back-and-forth motions to ensure thorough coverage.
Continue spreading the product until you achieve a thin and uniform layer

Wiping:
Once the product is evenly spread, allow it to sit on the surface for a few minutes, allowing it to bond and cure.
Using a fresh, clean microfiber cloth, gently wipe off any excess product or residue.
Ensure that no streaks or smudges are left behind, resulting in a clear and glossy finish.

Curing:
After wiping off the excess product, allow Shine Armor Graphene Ceramic Spray to cure for the recommended time, typically 24-48 hours.
During this curing period, avoid washing or exposing the vehicle to rain or extreme weather conditions.

Maintenance:
Once the curing period is over, your vehicle will be protected and have a beautiful shine.
For regular maintenance, you can wash your vehicle as usual using a gentle car wash solution and a soft sponge or mitt.
Avoid using abrasive cleaners or harsh chemicals that may degrade the coating.
Periodically reapply Shine Armor Graphene Ceramic Spray to maintain the protection and shine, typically every 4-6 months.

Tips for Optimal Results:

Work in small sections to ensure thorough coverage and prevent the product from drying too quickly.
Use multiple microfiber cloths to avoid cross-contamination and achieve a streak-free finish.
If the product starts to dry before spreading, you can mist a small amount of water onto the surface to reactivate it.
For best results, apply Shine Armor Graphene Ceramic Spray in moderate temperatures, ideally between 50°F and 80°F (10°C to 26°C).
Store the product in a cool, dry place, away from direct sunlight and extreme temperatures.

Here’s Why Customers Trust Shine Armor…